Factors affecting the processing efficiency of WEDM-LS and its treatment methods
With the development of industry, the processing method of slow wire processing has become more and more extensive, so what should we do when we have low efficiency in the processing of the WEDM-LS? Today, I would like to share with you some of the factors that affect the processing efficiency of WEDM-LS and the way to deal with them.
There are two main factors that affect the processing efficiency of WEDM-LS. The first is limited by the structure and clamping of parts can not effectively flush high-pressure water. The second is the fault of the wire transport system.The best way to deal with this at this point is：
1.Check that the conductive block cooling water is normal. Especially, whether the cooling water of the next conductive block is normal or not, because the copper powder will be dropped during the cutting process, the cooling water of the conductive block may be blocked after long term use of the machine tool, and even the washing water for the processing of the lower nozzle should be cleaned up and dredged.
2.Check whether the guide wheel is flexible and Winding wheel is normal.
3.Check the tension and speed of the wire and readjust it if necessary.
4.Check and clean guide nozzles and conductive blocks
These are the factors that affect the processing efficiency of WEDM-LS and the treatment methods. Whether it is low efficiency in the process of WEDM-LS or in EDM process, we should find the right reason and deal with it again.
There are two main factors that affect the processing efficiency of WEDM-LS. The first is limited by the structure and clamping of parts can not effectively flush high-pressure water. The second is the fault of the wire transport system.The best way to deal with this at this point is：
1.Check that the conductive block cooling water is normal. Especially, whether the cooling water of the next conductive block is normal or not, because the copper powder will be dropped during the cutting process, the cooling water of the conductive block may be blocked after long term use of the machine tool, and even the washing water for the processing of the lower nozzle should be cleaned up and dredged.
2.Check whether the guide wheel is flexible and Winding wheel is normal.
3.Check the tension and speed of the wire and readjust it if necessary.
4.Check and clean guide nozzles and conductive blocks
These are the factors that affect the processing efficiency of WEDM-LS and the treatment methods. Whether it is low efficiency in the process of WEDM-LS or in EDM process, we should find the right reason and deal with it again.
genos1818
Above article from KENOS official website (http://www.edm-accessories.com/)
The original address:http://www.edm-accessories.com/The_processing_efficiency_of_WEDM-LS.html
The original address:http://www.edm-accessories.com/The_processing_efficiency_of_WEDM-LS.html
评论
发表评论